Suspension Cell Culture Guidance

Optimizing Confluency

Optimizing cell culture seeding can be started using a 96-well plate. Plate a range of seeding concentrations and incubate according to experimental needs. Visually inspect via bright field microscopy to confirm an even monolayer across the wells at the target confluency.

Proceed to seeding into the 12-well Teton Slide Kit and utilize one of our optimization kits to further assess the performance of the cells, surface coatings and treatments. Note the difference in surface area – a standard 96-well plate is 0.32cm² per well while a 12-well Teton Slide Kit is 0.42cm². For reference, we seed 60,000-90,000 Jurkat cells per well of a 12-well slide kit.

Custom Surface Coatings

When utilizing the Teton Slide Kits, ensure that you are using the best surface for your cell type. Element Biosciences offers two slide coating options: Poly-L-Lysine coated glass slides, or uncoated glass slides. For the uncoated slides, our Teton CytoProfiling User Guide provides protocols for coating with the following surfaces: Collagen, Fibronectin, Gelatin, Laminin, Matrigel or Poly-L-Lysine. Once coated, store the slides as indicated for up to 10 days.

Optimizing Cell Culture with Cell Paint Markers

If you plan on using a custom protein panel, you can optimize for both cell culture and screen candidate custom antibodies using the Teton Custom Antibody Screening Kit (860-00044). If you are looking to optimize only the cell culture portion, that can be completed on AVITI24 with the Teton Onboard Cell Paint Imaging Kit (860-00047), or off-instrument with a fluorescent microscope and the Teton Cell Paint Probe Kit (830-00045).

Refer to the following documentation for more information:

Cell Culture Best Practices for Adherent Cells

Seed cells onto the slide

Proper pipetting techniques are critical to ensure an even monolayer of cells. Videos are provided in the next section to further highlight these techniques.

When seeding suspension cells, hold the pipette perpendicular to the slide and ensure that the pipette is not touching the glass slide. Gently dispense the cells into the well using a multichannel pipette.

When seeding cells, dispense liquid only once into the slide kit. For example, if doing a series of dilutions, prepare the dilutions in a 96-well plate. Avoid adding cells and then topping off with additional media.

Distribute cells using a rocking motion

Gently distribute the cells using a forward-and-back, then side-to-side motion.

Do not move in a circular motion.

Customers may find it easier to place the slide in a 10 cm dish. At a slow pace, move the slide in a North-South motion ensuring the slide moves ~5 inches (12.5 cm) in each direction. Pause and then move the slide in the East-West direction.

Centrifuge cells to attach

Cover the wells with the slide kit lid and place in the Teton Slide Kit Tray. Balance in a centrifuge with another assembly holder and spin for 15 minutes at 300 x g.

Fix suspension cells

Fix the cells by adding 8% formaldehyde to the centrifuged cells without removing the PBS. Incubate at room temperature for 20-30 minutes.

To disturb the cells as minimally as possible, we recommend the following techniques:

When adding liquid, dispense slowly along the middle of the well wall. This allows the liquid to flow more gently across the cells.
When removing liquid, tilt the slide and position the tip towards one corner. Leave a small amount of liquid behind, ~30-50 µL. Avoid making contact with the slide surface.

Once the cells are fixed, they may be stored in 1x PBS with RiboLock at 4°C for up to 30 days.

Summary

At this point you've successfully seeded and fixed your cells! Proceed to the next step to review videos for these pipetting techniques.

Seeding cells into the slide kit

Disperse cells using a rocking motion

Adding liquid after seeding

It is important to minimize disturbance when performing steps involving addition of liquid to live cells. Pipette slowly and against the well wall to remove strenuous forces on the cells. Additionally, leaving a little bit of liquid behind when removing liquid ensures liquid gently flows over the cells.

Removing liquid after cells have adhered

Phenotypes to avoid

To ensure best results, practice pipetting techniques such as slow pipetting and proper dispersion as described in the videos. Click through the cards below to see examples of poor seeding and the best ways to avoid them.

	To avoid the ring pattern that you see here, avoid circular movement of the pipette or slide kit. Use a side-to-side movement for uniform cell distribution.
	To avoid cell loss in the corner of the well, pipette slowly to prevent bubbles when dispensing cells. Avoid pipette tip contact with the surface of the slide.
	Cell loss in the middle of the well can be caused by liquid impact - pipette slowly and against the well wall.
	Avoid pipette tip contact with the surface of the slide to avoid scratch marks on the surface.
	Pipette tip contact with the surface of the slide can lead to cell loss in random locations.